What forms do you supply, and what sizes?

The same alloy specification can be supplied in several forms, which keeps composition consistent across an assembly that uses more than one:

FormTypical rangeUsed for

Wire on spool0.25–3.0 mm; 1 / 2 / 5 / 10 kg spoolsContinuous feed, automated and semi-automated cells

Wire in coil0.8–4.0 mmBench and manual work

Straight lengths450 / 500 / 1,000 mmKits, manual set-ups

Rods1.5–4.0 mm, with or without flux coatingManual torch work

Rings and preformsTo drawingRepetitive round joints, automated placement

Strip and foil0.1–1.0 mm thickWide flat joints

Paste and powderTo specificationComplex geometry, high-volume dispensing

Running stock diameters are 0.8 / 1.0 / 1.2 / 1.6 / 2.0 / 2.4 / 3.0 mm. Diameter tolerance, temper, cast and spool geometry are confirmed in writing before production, because automated feeders are sensitive to all four. Tell us which machine the wire runs on.